Robert Souza wrote:
quote :Hey Daniel!

Thanks for the help

So, this clears up a lot.
Let’s see, battery came in and I just connected it before reading your latest reply and I think I’m going to have to make some adjustments.

OK that’s great.
you know, i have experience with the MJC, but this is all experimental territory.… Read more

hey Robert,

OK – let’s tackle some of these questions

quote :1 – Should the MJ car cell be sealed where the male and female hemispheres meet with silicone/sealant? I’m having a hard time believing that even at half full that it won’t leak.

yes, you can seal it on the outside, around the circumference where the hemispheres meet.… Read more

hey Robert. Very exciting research you’re doing.
Your photos require permission to access. I just requested it, so I can see the pics,
but I can tell you, I am not a big fan of distilled water.
yes, natural spring water is much better. Trying to add life to dead water is harder than enlivening already living water. but with all the… Read more

hey!! beautiful polishing job.
how did you do the polishing?

quote :Sorry man it’s not working what a obout when I charge the water, do I have to disconnect the negative and positive, or I have to live the negative in ( connect)

while you charge, you have to leave both the negative and positive connected.
when you are NOT charging, so… Read more

below this area where you write, you will see, “select image file to attach”
make sure the image is not wider than 800 pixels.

Use this to upload the photo.
then place the cursor where you want the image to be.
and then click [img] button on the right of where you did “choose file”

Attachments:

Victor Cosan wrote:
quote :Ok I will let you know,Saturday I start to charging the water and Tuesday I install the moe Joe cell to the petrol or diesel engine and I let you know. For stage 2 the car it’s running in petrol and orgoniu from moe joe cell. For stage 3 only in energy from moe joe… Read more

yes, you can try it. diesel is different of course than regular fuel engine.
But you can try and see how it goes. I cannot say absolutely yes or no.
you may see fuel mileage improvement or boost in engine performance or more power or…
ALL of the above? Let us know how it goes.

Victor Cosan wrote:
quote :Hi
sorry for my broken English. :blush: :blush: I’m get the moe joe cell.Ca you explain please hau I have to charge the water for stage 3 please.

hi Victor,

Go to this page –
http://www.moe-joe-working.com/moe_joe_cell_charging.html
Go to Method 1 – Conventional DC charging with VARIAC and bridge… Read more

Nancy Fimbres wrote:
quote :maybe a better question would be what NOT TO DO. when someone says they ruined their moejoe, fried, burned, “moejoe was never the same”…what is meant by that and what causes that? so I know not to do that….(like putting the + and – on the center post….even if it is on the other side of the glass.… Read more

Nancy Fimbres wrote:
quote :Hello, put my moejoe together, but having trouble figuring out the where the positive and negative leads go. I may be tired and seeing things, but I think I saw one moejoe with the negative lead out the bottom in a glass container with hole drilled with the positive lead on the top but on the same center post? … Read more

george kouns wrote:
quote :Installing a Moe Joe Cell on a backup residential generator, is the positive pole of the Cell connected to a “D” cell battery or a car battery and to the metal of the engine at the same time during the engine block charging process?

I am not too familiar with generators, in terms of how the engine block is… Read more

Alejandro Navarro wrote:
quote :Hi Moshe,

We’re currently on the process of charging the cell. I would like to tell you how we have set up the charging process and what we’re getting to make sure that we’re doing things right and get an idea of how much we have left until the cell is properly charged.

Alejandro. I sincerely apologize.… Read more

hi Fernando,
I am not at all familiar with Krishnamurti’s writings. Could you share a few details of his work that you think might relate to inner alchemy, so we can get a better idea?

When it gets dirty and the gunk is blocking the energy / orgone feeling of the water.

Can you send pics of your setup and water?

How’s the whole process feeling?

Do you sense an increase in the energy of the water?

sha fur wrote:
quote :I am using structured, deionized, water and the variac is cranked up to at least 120 volts going into the Bridge rectifier. I’m unsure exactly how many volts out of the bridge rectifier, but the amps is less than 300 milliamps. I am guessing there is resistance.

Deionized water is your problem.
It is the ions in… Read more

sha fur wrote:
quote :Is it still OK to us baking soda to increase amperage to water. Currently I have the variac cranked way up and getting <300ma. I read some information about using baking soda to increase amperage, and it was 4 years old. Just verifying it is OK to use baking soda.

Shane.

Hey there Shane.
Good to hear… Read more

Bryce Healy wrote:
quote :Possibly relevant to this thread but I happened to find a AC/DC power adapter at a salvation army shop, it’s DC output is 12V and 150mA. I spliced the ends to moe-joe cell with aligator clips and powered it up using a surge protector for safe and easy on/off, connect/disconnect use.
It has a similar warmth and feel… Read more

Great. Let us know how it goes.

sha fur wrote:
quote :I just managed to acquire some parts for making a water recharging cell. I have most of the parts for the electrical part of the conditioning procedure and it seems I may have to *order* a capacitor. Moshe? You suggest a “Capacitor of 450 uF (microfarads) and rated for at least 200 Volts.” What lead you to the… Read more

Here are Bryce’s images. Wow Bryce. What a difference!!

Attachments:

sha fur wrote:
quote :Is there a complete instructions file, that is current and available, on Moe-Joe Installation? Including anything that must be modified on the vehicle?

Not really, no. It’d be a nice thing to have, eh?
I can think of some guidelines. I should write something up more officially.

eg Keep cell away… Read more

sha fur wrote:
quote :What kind of success did the VOLO produce for you, Moshe? I see no report of findings in this thread.

No success. I have yet to find any O2 sensor trick that works.
All the positive results we have had, or that I have heard of, have come from straight installation without any other tweaks.
However, that is not to… Read more

Roni Schmeling wrote:
quote :How much water is placed in the cell? How do I control the consumption of this water?

You are speaking about the car kit. Fill the cell almost until full.
You will have the aluminum connector out the top, sealed, so if the level of the water rises, it will not overflow anywhere. so let’s say like 95% full… Read more

Roni Schmeling wrote:
quote :How many kilometers rotated I need to do make the electrical charging process of the cell and continuously rotate with the vehicle must do this procedure? I’m thinking it prevents the use of that due to this complexity.

It’s important that you do not charge the cell while the car is running or moving.
The… Read more

James A.L. Cullumber wrote:
quote :Day 20

About Day 20. Decided to take the cell out, to attempt to find out what is going on.

The mileage and the power seem to have gone to a normal level, not a level beyond.

Took out the water and found this.

the image didn’t display properly.
here it is.

Wow. yeah. that’s some… Read more

James A.L. Cullumber wrote:
[quote]quote :I’ve shut the pump off, turn on the car, let it run for 1 minute, and during that minute, there is a vacuum whining like it’s trying to pump fuel that isn’t there, like there is a secondary pump.

I’m letting the car run idle, no movement due to the fact that every time I tap the gas pedal it… Read more

James,
where did you connect the tube from the cell to the engine?

James A.L. Cullumber wrote:
quote :Okay

I must of done something wrong here. When I was driving a trailer ~280 lbs, it felt smooth. Then, I forgot to switch off the charging circuit, and when a relative used the car w/ the trailer to gather metal bars at a Metal Shop, he said that it felt no different from other times.

This sounds like… Read more

James A.L. Cullumber wrote:
quote :quote :James, that is excellent news. Thanks for sharing.

Can you tell us how you prepared the cell before installation?
What water did you use?
How did you charge the water?
How have you connected the cell to the chassis and the battery?

The water I used is tap water from a well.

I charged it… Read more

James A.L. Cullumber wrote:
quote :Day 3 – Charging

Day 4 – Rode the Jeep ~10 miles, smoother than it was previously. Able to go 0 to 60 in 12 seconds, rather than 18 seconds with only the Gas pedal half-way to the floor.

Day 5 – Overnight charge, checked the water level, only 1/64 was used. Current Average MPG is ~20. Current… Read more

Closeup of the setup.

Keep the results coming James.

Attachments:

James,
Thanks a lot for sharing those results with us.
That’s a really excellent start.

Here are the pictures of James’ engine setup.

Attachments:

Dear Grand Mother,

Medical doctors cannot help you very much with chronic problems.
I have drank moe-joe cell water and it is highly charged and can help boost your vitality, but a more individualized, holistic approach is more indicated for each person -ie to get to the root of the problem.
Please check out my website here for a… Read more

hi Scott,

I will definitely check out your forum and see what I can offer.
It may take some time because I am presently in India.

And you’re right – the forums here have been quiet.
Hopefully, more activity will be injected in the future.

lots of love,
Moshe

hi Scott,

I will definitely check out your forum and see what I can offer.
It may take some time because I am presently in India.

And you’re right – the forums here have been quiet.
Hopefully, more activity will be injected in the future.

lots of love,
Moshe

Hi Scott,

That is a very noble endeavour.
Thanks for sharing.
Let us know if there’s anything we can help with…
knowledge, connections, etc.

lots of love,
Moshe

Name Namesson wrote:
quote :1. Are the distances between the metal pipes or spheres suppose to be the golden mean ratio like they say in the movie “The Story of the Joe Cell”? So the diameter of the larger sphere is 1.618 times bigger then the smaller one? How close to that value does the distances have to be? Or shall the distances between… Read more

This is the translation for Herbert’s post:
And I will answer below.

quote :Since the cell charge is fed by Orgon, and in orgone influences are not without risks. Etc. thus have a negative impact in charging such as in cathode ray equipment, televisions, computers, oscilloscope, microwave ovens, fluorescent lights, luminous face… Read more

Dimitri Matthys wrote:
quote :Dear friends,

I want to pose an urgent question regarding my father who is diagnosed terminally ill from a very fast growing lung cancer by classic medicine last monday. They give him 2 weeks to live (metastase to liver and bone). It was detected very late because giving no symptoms until last 3 weeks. Next… Read more

Adam Adam wrote:
quote :I have just purchased a water charger and am very excited to start putting it together!

I live in a large polluted city where the tap water is for lack of a better word, gross. Bottled “spring water” I assume is actually dead so what would be the best course of action in finding my first batch of water that I’m going… Read more

good stuff Chris.
Looks good.

It is interesting that convention current requires the conducting material to be within the insulating material, as in every standard wire.
however, it seems to work well to have the conduction of orgone as in having the insulating on the inside and the conducting on the outside.
one can accomplish… Read more

Hi there Hamosh.

Sorry for the delay in answering you.
I did not see any video attached.
Can you please rephrase your questions, so I can understand and answer?

Maybe you can write in your native tongue, and I will use google translator.
Just tell me which is your language.

Christon Dibama wrote:
quote :Hello Daniel

I have several questions regarding the Moe Joe and Safety and possible Dangers.

Do you know if it is possible that a cell can shift into producing “DOR” Energy ?
DOR means some Kind of negative Energy, stagnated wave, etc.

The cell won’t really produce DOR by itself, unless you use it next… Read more

Jung-Nam Park wrote:
quote :Hello, 🙂

I am curious about the orgone energy to increase fuel efficiency with Moe-Joe Cell Car Kit.

What is orgone energy?
I mean.. What is the definition of orgone energy?

Hi Jung-Nam,

check out this definition and do a little searching around on your own.
Orgone is the basic universal life… Read more

Jung-Nam Park wrote:
quote :Dear Moshe,

Thank you for kind reply..

Recently, I have charged the ground water during several days (more than 6 days) with 1 amps to apply to car kit.
When I analyse it there are Fe, Cr, Ni components in charged water even though I could not know the concentration of components.

That sounds pretty… Read more

that is great.
I wonder if he grew from the bions!

Wilhelm Reich would be proud!!

Moshe

Richard von Raffay wrote:
quote :Hi ! I do not understand : from where to where one should insulate the bolt ? Does it mean that the stainless steel from the bismuth core should not be exposed to the water at all ?

hi Richard, good question.
the stainless steel bolt from the bismuth core should only be exposed to the water in the very… Read more

Richard von Raffay wrote:
quote :Hi Moshe,
thanks for telling about charging times, why so little as 5 x 10 Min. why not 24 hours?

you want to excite the water. it doesn’t take too long.
the lower the voltage you use, the longer you can charge, but it is not really necessary. one has to develop some sensitivity to the energy of the water… Read more

Jung-Nam Park wrote:
quote :Hi Moshe,

My question is… This is an assumption. If some silicone part covered bismuth core was peeled a little bit. so, if bismuth core was contacted with water a little bit. Can Bismuth core material reach out into water and can it form any scum or particle? Is it possible to form?

yes, in that case,… Read more