[Moshe Daniel]

Piotr, I have also had magnetic metal and it does actually make a difference. it does block the process because it throws off the electromagnetic fields of the metal and creates distortion. I would suggest getting it heat-treated, if possible. or, you can live with it, and even possibly make it to stage 3.

But remember this – Stage 3 is not that important. it is just a sign of the water being prepared and it does require higher amperage. you can use lower amperage, never see stage 3, but still have a cell that is prepared with a strong field to go to work in the car.

[Moshe Daniel]

Yes, then best is to have it next to the engine, away from the alternator. Ground it to the chassis and to the negative terminal of the battery, then the whole car will get the energy field and will be lighter, and better handling….
and maybe you\’ll have more power.

[Moshe Daniel]

Hi there.
Yes, you can try this, but I do believe that part of the problem with this type of diesel engine is that it does not have the high voltage sparks going off and this may be crucial in transforming the energy of the moe-joe cell into usable energies.

[Moshe Daniel]

ILIESCU DRAGOS wrote:

quote :

For those with more experience on how the cells are working, I would like something about why the cell do not work on normal diesel or better said what is necessary to do for normal diesels for obtaining results in fuel economy? Thanks.

Hi Dragos,
Thank you for your great question.
I am also waiting for my friend Tophur to write some of his thoughts here. My understanding is that you need some sort of a vacuum to draw in the energy toward the engine.
The other idea is the spark – there is no spark in a diesel. I think this plays an even more important factor in the reason why the cells don\’t work. The spark plays some important role in converting the \”neutrinos\” or the \”torsion field\” that the cell produces into usable energy / force for the engine\’s pistons.

[Moshe Daniel]

Peter,

This is very exciting and could be very very important if it can enable everyone to have fresh, live, \”mountain-source\” water in their homes without having to be close to a real spring water source…

Can you put up pictures and videos?

And how about the schematics of how this is done?
This could be wonderful.

Imagine is Now!
Moshe

[Moshe Daniel]

ANDREW MURRAY wrote:

quote :

Here is a video showing a \”Earth Battery\” producing 21 mA and running a small motor. If we use the correct materials with the right soil in between the plates of the Moe-Joe cell, I think we could harness a lot of energy from the electrical chemical posses.
http://www.youtube.com/user/lasersaber#p/u/33/Cr9eEaldcnY

Now if that is under the ground, might as well put an antenna up to capture the radiant energy that is all around us. Over 350 kV in our magnetosphere alone! All that we need to do is use a \”Tree style\” energy system.

I love that and I agree with you – if you climbed way up on the house and put a big antenna up there, or a big sheet of stainless steel or possibly aluminum covered in a layer of plastic / acrylic, you\’d have a really nice positive antenna, and may pull more from the atmosphere.
but there, you\’d need to use a capacitor, i believe.

quote :

A truly rev. idea of using lens law to make regenerative braking accelerate the rotor rather than slow it down when under load.
http://www.youtube.com/user/ecopowerfuture?feature=mhum#p/f/12/jYi2OyS5cK4

interesting. i will have to study this further. thanks for sharing all of this with us.

quote :

All very great stuff, just need some help with finding the correct electrolyte(minerals and bionic factors) and getting the correct circuitry.

a friend of mine has had some experience and witnessed another sort of earth battery – made from certain materials. i\’ll see if I can get some details.

thanks and lots of love,
Moshe

[Moshe Daniel]

hi Mikel,

I agree with you. We have to know how to inject correctly.
thank you for sharing.
very interesting.

[Moshe Daniel]

Mikel,

I like the post.

I can comment to totally agree with you – the energy that is coming from the cells may be a form of gas, like HHO or Brown\’s or some gas which is even before hydrogen – Walter Russell speaks of other elements before Hydrogen –

However, many of us, myself included, believe that the joe cell and the moe-joe cell are creating another kind of energy – call it neutrinos, orgone, we\’re not sure WHAT to call it, but it creates a form of implosion. Brown\’s gas does too and so does HHO, so maybe it\’s that. So the alteration needed on the engine involves changing the timing of the spark, advancing it around 60-70 degrees.

Next thing, could you give more information about the way you have learned to couple the gas to the intake?
Do you have more pictures? Item names?
Stuff like that would be appreciated.

Imagine is Now,
Moshe

[Moshe Daniel]

Peter smith wrote:

quote :

So
You calculate ratio between 1 – st and 3 – rd sphere.

you calculate ratio between 1st and 2nd, between 1st and 3rd, and between 2nd and 3rd.

quote :

What about charging water. A dont want built special cylinders for preparing water. I would like prepare water in this (above) cell (sphere).

the cell that goes into the car has to have very little holes so that the water doesn\’t leak out. But for this reason, it doesn\’t make it quite as good for charging the water… but yes, you can still use it to charge the water.

quote :

The question is
the water level shoul be above 2-nd shpere (of course after assemble)?

i fill the cell almost right up. If you begin charging and making lots of bubbles, some water might flow outside the cell, but that is okay. you\’ll find the right level.

Imagine is Now!
Moshe

[Moshe Daniel]

Peter smith wrote:

quote :

So
Then I start from 35 mm

r1 = 17,5 mm v1 = 22, 4493 cm3
r2 = 22 mm V2 = 44,6022 cm3
r3 = 28 mm v3 = 91,95232 cm 3

Ratio1 (v1/v2) = 0,5033227
Rario2 (v3/v2) = 0,48505

so
c7 2093 next 1053 (near c6 1046) and 507 (near 523)

What do you thing Moshe it should be good?

So Peter, the three sizes of your moe-joe cell are:
\”35 mm, 44 mm and 56 mm\” is that right?

you have to also test the ratio between the Root, the first, 35mm sphere, and the outer sphere is also important.
so you have 91,95232 & 22,4493 – ratio is 0.24414
So the note relationship would be 0
C7 2093 for root and 510.9864 Hz which is close to C5 523.25

closeness there is 97.6563% – not too bad. i think you have it there.
if you made the third one a little smaller, it may be better.
like try 55 or 54 mm.

Moshe

[Moshe Daniel]

Peter smith wrote:

quote :

Hi

I calculate dianameter and dimations will be

25 mm
40 mm
163 mm

Ratio 0,244

Ok Peter. so you are beginning with 25mm, which is 2.5 cm, which is 0.98425inches, which is wayyyy too small, in my opinion. I think the minimal size you want is 1.5\” or 38mm.

then from there, did you check the resonance?

assuming that the 25mm is the \”base note\” then the 40 mm sphere would be the following…

For the 25 mm V = 0.49925 in3
For the 40 mm V = 2.04493 in3
4.096004006009014 times the volume –
So a frequency 4X lower.
If we use C7 2093.00 Hz then 510.99 Hz for the 40mm sphere.
B4 493.88 69.9 C5 523.25 65.9 C#5/Db5 554.37 62.2
So it is between a B and a C note –
It is 97.65615448939571 % close to the root note. This is not too bad, but it is not great.
Now for the 163 mm sphere – the volume is V = 138.37501c3 which is 277.165774661993 times more.
R’ = 3.208655”
C11 (for calculation purposes) – 33488.08 Hz / 277.166
= 120.8235747850158 Hz
A#2/Bb2 116.54 296.
B2 123.47 279.
This note is between a Flat 7th and a 7th note – it is not very good.
C3 130.81 it is 92.36570199909471% close to resonance with the C octave.
This is not resonance.

[Moshe Daniel]

Hi Peter,
I have heard this question before. I don\’t think size matters, unless what you are interested in is HHO gas… then size does matter, to a certain degree. However, if you\’re attempting to create the ZPE (Zero Point Energy) what is more important is resonance, and harmony.
So, the size, in my opinion, can be anywhere between 4-6\” – should be fine.

What are your thoughts about this?

[Moshe Daniel]

Caio Costa wrote:

quote :

Did anyone here dream about alchemy symbols before actually learning any alchemy?

It is rare, but I have heard of this happening.
Also, it is a belief amongst alchemists, that if you were an alchemist in another lifetime, you will be drawn back to alchemy. So that is perhaps what is happening to you.

[Moshe Daniel]

Hi Noah,

thanks for that knowledge on the Earth\’s Precession. Makes sense.

You wrote

quote :

In ancient Hebrew texts, this companion is known as the \”sun of righteousness\”, the Destroyer, Wormwood, etc.

Is this also known as Nibiru?
Is this the planet/comet / whatever that passes very close to the Earth and causes major disaster? Is that what you\’re asking about?
What is the Hebrew for the \”sun of righteousness\”?

Is it Shemesh Tzadeck?

Imagine is Now,
Moshe

[Moshe Daniel]

I love it Alexis! It\’s right up there with \”If Jesus came down, and he manifested himself as cheese, he\’d be this cheese.\”

Thanks for sharing.

You want to post any pictures of said \’mush\’?