Construction

[Moshe Daniel]

Piotr, I have also had magnetic metal and it does actually make a difference. it does block the process because it throws off the electromagnetic fields of the metal and creates distortion. I would suggest getting it heat-treated, if possible. or, you can live with it, and even possibly make it to stage 3.

But remember this – Stage 3 is not that important. it is just a sign of the water being prepared and it does require higher amperage. you can use lower amperage, never see stage 3, but still have a cell that is prepared with a strong field to go to work in the car.

[Peter Smith]

So you suggested that I should make heat treatment. OK

I read that the secund stage of cell orgon is collecting but not stop in cell and it is difficulty to direct to engine. The third staege allow for collect orgon, keep – for e moment in cell and direct to cilinders in engine.

Do you agree with this?

[Moshe Daniel]

Piotr,
I used to think this. Now, I honestly do not know. There is a lot of revision of many old ideas happening right now, about Joe, about Alex. There\’s the Hull effect, there\’s the idea of charging the water in the coolant, and the oil – there\’s many ideas out there.
This idea of stage three seems valid – the cell is holding a charge and it will not lose that charge at stage 3 and the energy will be conveyed to the engine and also, to the entire car through the negative pole of the battery and that is connected to the whole chassis.

i think for now, it may be useful to follow that as an idea, as there are no other ideas, at this time, which are very solid and developed.

[Peter Smith]

So

At that moment we will think in this way, that it should be reach 3 – rd stage.

I know one person in my country who built the cell. But he could\’t reach working engine on cell and he could\’t reach 3 – rd staege. He think that the reason were weldes on the tubes.

[Peter Smith]

Hi

Last time me calculate what the first dianameter shoud be 74 mm. It shoud be inner Or liter dianameter. I think that tnie is not so importat but if żonę Boży make inner that the next olek shoud be make as a inner

[Moshe Daniel]

Hi Piotr,

I really don\’t understand this last statement / question. Can you take a look at it again and reword it in a different way so I can understand?

[Peter Smith]

I would like to put a drawing – how I could do it

[Peter Smith]

We calculate that first diameter should be 74 mm. But material has 2 mm thickness. I will have 74 mm inside and about 78 mm ouside or 74 ouside and about 70 inside. OK,

I would like to take 74 mm inside and ouside I will be – after preparation hemisphere – 78 mm (2mm thickness material on the both side).

[Moshe Daniel]

When you write a post here, you can see below the white text box. \”Select image file to attach\” – go ahead and do so and attach image.

[Peter Smith]

Hi

I prepare simply draw. And I have question

-if the insulator (blue element) can be in several elements?

– the insulator (blue) should insolate the screw and hemisphere but water can flow between both elements

---

Attachments: