[Peter Smith]

Hi

I prepare simply draw. And I have question

-if the insulator (blue element) can be in several elements?

– the insulator (blue) should insolate the screw and hemisphere but water can flow between both elements

---

Attachments:

[Peter Smith]

We calculate that first diameter should be 74 mm. But material has 2 mm thickness. I will have 74 mm inside and about 78 mm ouside or 74 ouside and about 70 inside. OK,

I would like to take 74 mm inside and ouside I will be – after preparation hemisphere – 78 mm (2mm thickness material on the both side).

[Peter Smith]

I would like to put a drawing – how I could do it

[Peter Smith]

Hi

Last time me calculate what the first dianameter shoud be 74 mm. It shoud be inner Or liter dianameter. I think that tnie is not so importat but if żonę Boży make inner that the next olek shoud be make as a inner

[Peter Smith]

So

At that moment we will think in this way, that it should be reach 3 – rd stage.

I know one person in my country who built the cell. But he could\’t reach working engine on cell and he could\’t reach 3 – rd staege. He think that the reason were weldes on the tubes.

[Peter Smith]

So you suggested that I should make heat treatment. OK

I read that the secund stage of cell orgon is collecting but not stop in cell and it is difficulty to direct to engine. The third staege allow for collect orgon, keep – for e moment in cell and direct to cilinders in engine.

Do you agree with this?

[Peter Smith]

So
You calculate ratio between 1 – st and 3 – rd sphere.

What about charging water. A dont want built special cylinders for preparing water. I would like prepare water in this (above) cell (sphere).

The question is
the water level shoul be above 2-nd shpere (of course after assemble)?

[Peter Smith]

So
Then I start from 35 mm

r1 = 17,5 mm v1 = 22, 4493 cm3
r2 = 22 mm V2 = 44,6022 cm3
r3 = 28 mm v3 = 91,95232 cm 3

Ratio1 (v1/v2) = 0,5033227
Rario2 (v3/v2) = 0,48505

so
c7 2093 next 1053 (near c6 1046) and 507 (near 523)

What do you thing Moshe it should be good?

[Peter Smith]

Hi

I calculate dianameter and dimations will be

25 mm
40 mm
163 mm

Ratio 0,244

[Peter Smith]

I think that ZPE source energy is created on quite different rules but not only. I dont know what will work or not.

The most important thing is – ZPE Maschines are working and only after that we can say that something has inluanse or not.

But generally I think that you have right.

At that moment I still have to find company who has stepms with right dimentions. My cell will be built with 316L steel and the most probalby 2 mm thinck. I have supplier which have 40 42, 60, 80 82 etc but (as we spoke previously) I need smaller. Finally if I can\’t find ready stamp I buy new. It will be cost about 400 $ (one).

[Peter Smith]

quote :

i guess you could say so, although i don\’t think that is actually what the resonating spheres will do.
it is creating a harmony to open up the zero point field so that more \”ether\” or i guess you can also say \”orgone\” can flow through. i see the resonance as being important for balance.

What is another elements of balance except of tenders? Do you have any idea (voltage, water, material – steel…)

quote :

no. it means that in order to create exact custom sizes, it costs $10,000 / size.

Why the cost is so high – it is cost of stemp (in my country new stemp cost about $ 200), what is the reason so high reason

Another question – did you have any information about Bill Williams. I read that he start his truck – Ford on cell i 2006 IV and after that he has (problably) visit MIB – \”man in black\” – But the most important is this that he found the way which is working. He use normal cylinders (not spheres) cell

[Peter Smith]

I ask about this – if cell is tremoring (like string in gitar) it helps in collecting orgone?

–
i have checked it later when I began to get really into creating a resonating moe-joe cell.
in order to get custom sizes costs $10,000 ++ for the molds / dies. i will do this in the future. –

So it is mean that when you try to get this effect (tremoring) in \”cylinder\” cell it costs more than $10 000

In previous message you (Moshe)suggested that it is good idea to bulit 3 sphere cell? yes? Should it works so good like 4 sphere cell

Happy Christmas for everyone

[Peter Smith]

So

It means that if I want to collect orgon efficiency it should be effect tremor. Of course the highest tremor is on the sphere with the smallest diameter, so the next sphere has smaller frequency tremor and the best effect is when different frequency between one and next diameter is about whole octave or multiple octave.

We take C7 only of this reason that it will be easer to calculate next diameter.

yes?

If any body check the rule for cell with normal cylinders?

[Peter Smith]

Thanks Moshe

So. If I understood good.
Our aim is have the same rezonans beetwen 1 – st and 2 – nd and 2 – nd and 3 – rd and 3 and 4
So we should have first and second diameters – the best is to have 2x bigger second diameter) and after that we calculate 3rd and 4th dianameter
Why you think that relation 2X is the best
Why we should take c7? Not c3 or c 5 or c 2…

[Peter Smith]

Hi

Thanks Moshle.

Please put here link there is information how to calculete the best dianameter.

Previously i read that it should by as a Fibonacci sequence (alex S. materials) but I know that it could only theory.

So please put the link with information how to calculate the best dianameters for cell

And please give me chemical composition of GOOP. I try to find something similar on my local market