[Moshe Daniel]

here is the guru2you video from youtube. looks like a very simple circuit.

http://www.youtube.com/watch?v=Ru8YQ6HUwbU

[Moshe Daniel]

Elianodi Eliano wrote:

quote :

Hey again Daniel,

Thank you for your advices. 🙂

Also, I\’d love to see the schematic of the bedinin charger Solid state

Sure, I have a simple one, the bedini solid state simplified to a transistor, couple of resistor and a bifilar coil.
Here it is attached.

Elianodi, we didn\’t receive any attachments from you this last email. Can you re-attach?!?!

quote :

But what\’s interesting is that I used this circuit to make Colloidal Silver, it was recommended by Lindemann.
So what happened is that the voltage on the output raised increasingly to 2.2V and stayed there the whole time, with soooo little black spots on the silver rods.

Eli, are you sure you mean only 2.2 volts?
with my bedini i was getting many hundreds of volts…

quote :

Now what\’s moooore intersting, is that the HHO cell dudes, are using a self resonating charger, called Meissner Circuit. It will adapt to the cell continuously, in terms of amplitude of the pulses and frequency. Pretty amazing dude, energy efficient, and intelligent. And the schematics are very simple to make. In an hour or two, you\’ll be running your Moe-Joe on it. They too condition their cells to have this white scum on the plates, which takes to form for hundreds of hours, but then they can condition even tap water in two hours or so. There is a modified Meissner Schematic,works perfectly, that I found in a book I bought from a dude experimenting with radiant energy, an experimented mechanic person. I don\’t know if I am allowed to share here, let me know if it\’s okay with you. I think this charger will make a difference for Moe-joe.

this is excellent! thank you so much for sharing Eli.
This is exactly what we\’ve been looking for with the moe-joe cell. Self-oscillating!! that is perfect, because it is much too difficult to calculate the resonant frequency of the moe-joe cells. it\’s too complex. but this is perfect.

yes, you can share it here.
Can you attach the modified Meissner Schematic from the book you found (just give good source for the schematic) and also the original meissner circuit.

i am beginning to look into it.
Looks like guru2you on youtube has a video about it as well.

more questions to follow.

I am not sure if this bedini circuit is adjusting its frequency with the battery with time, I need to have some better tools to measure, but yesterday, I measured a pulse of 20khz on my digital meter.
Did the battery initial conditioning take a long time with you?[/quote]

[Moshe Daniel]

Elianodi Eliano wrote:

quote :

Hello daniel,

Hope you\’re doing great.
I built myself a Solid state bedini charger, very simple, according to this schematic.
It\’s very simple, and it works.

that is so excellent. Can you take some pictures of your setup?
Also, I\’d love to see the schematic of the bedinin charger Solid state!! I have a couple of bedini circuits, but not the solid state ones. I\’d love to try the solid state one with the moe-joe cell.
Please share you setup and schematic! We\’d really appreciate it.

quote :

Can you give some advices on it in terms of :
1- Period of charging.
2- Scum filtering
3- What to look for.
4- the difference with a normal DC charging.

1 – Period of charging – This is a flexible part of the process with much to be discovered. For example, You can charge for a few minutes several times a day. So try 2 minutes charging 5 times / day – spaced evenly.
You can also try to charge for 1 hour once or twice / day.

I am assuming there is very little current passing.
what is your frequency? Can you modify or tune to different frequencies??!?!

2- Scum filtering – you shouldn\’t have any scum produced with the bedini system. do you? Or is it from a previous DC setup?
I suggest you use the blue shop towels. i use two of them. first i wet them with good, filtered water, and then pour the scummy water through… should be good. you will lose some of the potency (charge and energy) of the water after to filtering

3 – what to look for – you won\’t see much with Bedini. but you\’ll feel it. put your hand around the cell. draw it back in and out, and sense the field.

4 – the difference with normal DC charging – good question. this depends on the frequency.
normal DC is slow and steady – the water builds up a charge quite slowly, over time. the bedini system is charging the water with radiant energy. it\’s on a different spectrum.
i\’ll have to ponder the differences. i am not so clear right now.

Perhaps others can comment too, what they think is the difference?

[Moshe Daniel]

Chris, that is a remarkable increase in fuel mileage. 300% increase. What led the cell to become \”ill\”? If you know that, you\’re really going in the right direction.

[Moshe Daniel]

good job, good idea as well with the stainless steel wire – having the same conductor as the cells… less switching between metals, more harmonious flow of energy.

Did you get any miles per gallon reading on your truck while it was in effect with the moe-joe cell?

[Moshe Daniel]

Chris McGuire wrote:

quote :

Moshe:
I have succesfully installed my first moe-joe cell!

I completed my installation at night this last Thursday. I allowed my engine block to charge overnight. My engine behaved quite different the next day.
Normal Conditions: I always needed to pump my gas petal to get the engine to start cold. Top speed of my truck was strictly 55 mph, any faster and you can be sure to overheat. (81 toyota deluxes are slow but reliable). Going up steeper grades on freeway, my power dies out and I have to shift into the lower ranges and put on my hazard lights. This is all normal stuff for me 🙂
After Moe-Joe: Started steady and never died first time on a cold morning. I never pumped the gas once. I drove a few blocks to the job site. Worked about 10 hours (meanwhile charging the engine block) and then drove 54 miles on 1 gallon of gas (Nobody I know personally (presently :)) gets that good of gas mileage on their cars or trucks, maybe their scooters or motorcycles), especially on a old work truck with a ladder rack featuring massive air resistance. During my lovely drive I noticed INCREDIBLE power increase. Up and down mountainous terrain without losing power in my highest gear. My max speed increased to 65 mph! During moments of my drive it went even faster! I can sense a breath like in flow and out flow of power that came and went in my truck. Power and top speed would increase for 5 minutes roughly then leave for five minutes roughly. Going up hills my truck really felt much lighter and more powerful (worked harder with less feedback, rev\’d higher without damage).

This truly was an amazing experience!

That is great to hear about your excellent results…
thank you for sharing.
you see how fast the moe-joe cell adjusts to the car. it happens faster than with the joe cell, for certain.

Your great results are also a great reflection of how good you are with the cell and with the technology in general. you have an excellent set up there.
Well done!
Keep us posted.
if you can also post results on more precise fuel mileage changes, that would be great.
can you also include a picture of your entire vehicle ?

thanks!

[Moshe Daniel]

Chris,
that tube looks like an electrical wire insulator.
it\’s aluminum, right?
that\’s great.
another option is to use a rubber transfer tube, which can be a fuel line – i supplied you with the transfer hose with the steel spring. so that will suffice.
make sure the steel is connected electrically to the aluminum connector – use steel or aluminum, not copper, so you\’re not jumping around between metals too much.

[Moshe Daniel]

very beautiful. very nice work.
you\’re very skilled at this.

Is your aluminum connector electrically connected to the other sphere?
also, when you have the transfer tube, make sure the metal of the tube is also connected to the alum connector, but not touching the engine block.

This cell has a consciousness. Use your heart and mind to guide it, direct it, to what it\’s supposed to do.
The zero point field Unified Field will do the rest.

[Moshe Daniel]

Chris,

cool video man! I love where you live. Nice lot and great setup. Great magnet trap.

a few suggestions to tweak your moe-joe into even better shape and production –
1) the moe-joe will charge better when fully submerged.
2) best to have the negative coming in from the BOTTOM and to find a way to insulate the top portion – i use shrink wrap, works well – you can also use a nylon spacer there, works well, and you can use a nylon nut also to also help with the insulation.
3) also insulate the wire bringing the +ve electricity to the cell, so that the electricity only \”sees\” the water for the first time on the INSIDE of the 5\” male sphere.
4)Charge your batteries with the battery chargery – fine, but then remove the battery charger from the batteries when charging the moe-joe cell.
5) get a small hole in the bottom of the glass vessel – this really helps with my moe-joe cell. i\’ve noticed a big difference. glass is the best, and having the negative coming out of the bottom, is important.

You\’re doing awesome.
thanks for sharing the pictures and videos with us.

[Moshe Daniel]

Chris McGuire wrote:

quote :

Moshe:
The original crack ran right through the middle where the all thread\’s meet, I am running to home depot now and wherever else I have to go to get a couple of good glass containers for charging/filtering. Is Shoe goo (brand) a safe bet to reseal my bismuth core?

I didn\’t know Shoe goo, so i did a little research.
Info

it\’s a petroleum byproduct – Toluene.
Kind of toxic. not good for water drinking option.
however, for car, it may be tough enough.

maybe you can try it and then report?

Your picture of the fixed bismuth core is hilarious, by the way.

[Moshe Daniel]

Chris McGuire wrote:

quote :

I assembled my car kit a couple days ago but I was sloppy in keeping dirt out so I carried it around for a few days assembled yet dirty. I noticed today as I was dis-assembling the car kit unit that the bismuth core was cracked (1 of two that I have). I am wondering what your opinion is of soldering the bismuth core back together? Should I try to liquify the bismuth again? Or can I just use a soldering iron from radio shack and some flux core solder? What effects have you noticed flox core solder joints having on the flow of orgone?
Thanks!

hi Chris,
soldering the bismuth probably won\’t work, since it has such a low melting point and will likely melt totally out of shape before you can adequately repair it. . if it just cracked, your best is in reinforcing it with goop or some solid hardening silicone gel. can you get some of that?
can you include a picture here of the cracked Bi core?

[Moshe Daniel]

Chris McGuire wrote:

quote :

I have successfully charged my first steel pot of orgone water. I used a base of structured water produced from my own vortex trap. I think this helped my charging process proceed so quickly and on such a low voltage (12 v). I have not yet assembled my car kit so I took the wonderfully milky-white-after-filtered water (produced under a full moon) and gave it to some love starved plants. haha. Can\’t wait to see the reaction of those plants.

wow! that sounds amazing! I can\’t wait to hear about the effects on the plants too!
The full moon does have an enhancing effect on the orgone.

quote :

So my next step is to polish/clean/mount my car kit and charge another batch of water. By the way, these moe-joe\’s are actually quite resilient in the charging process, thanks Moshe for advising against the coatings.

you\’re welcome. especially at 12V – that is not a threat at all to that good 316L stainless steel!

quote :

I think my first arrangement of the car kit I will try to charge my engine block from the side without touching any of my fuel system. I want it to slowly and happily charge the engine block while I\’m running on gasoline still and I am a bit excited to see the effects on my gas mileage. 🙂

goodl luck, and keep us posted!

[Moshe Daniel]

I read some of the brief intro to those articles. That scientist sounds brilliant. One day, people in power will allow true genius to help amend and improve the world, rather than suppressing it.

Can you Imagine our world where all the brilliant inventions for the good of humankind were implemented and not suppressed?

[Moshe Daniel]

victor me wrote:

quote :

financial abundance for all
i see a contradiction in abundance for all and the purpose of money – wouldn\’t that be an inflation resulting in the disappearance of money and the \”financial\”?

There is no contradiction.
You may be misunderstanding the language or the concept…

[Moshe Daniel]

victor me wrote:

quote :

My first post sounded like i am a negative person. I try not to be and i am happy that negative thoughts have less impact. I know my intentions to be good.
I have a gift (one that i am aware of) – i can \”see\” into people and situations. I try to understand and use this for good.

we\’re open to hear your suggestions. this 2nd email is much clearer, so thanks for taking the time to explain further. we\’re glad to have you and happy to hear your suggestions. This is, after all, for all people.

quote :

.thelastfourbooks.com (circleofnines)
i found this site about 1 year ago. I found all the cans resonating in/with me and my vision of the world. By the way they were formulated it helped me find a balance and find out things about me.

that makes me very happy to hear. thank you for sharing!

quote :

I was eager to share this with others. They found the site and navigation counterintuitive.

We\’re working on it. We are doing a whole makeover.
It will be much more simple and intuitive.

quote :

The nine circles helped \”shape my world\” and my project is about sharing my vision with others.

great! bring them here too!! 🙂
In about a month or two, we\’ll be launching a new and improved site.

quote :

I will try to formulate my ideas better, and hopefully have a good contribution to \”nutopia\”.
the \’happy to be here\’ is hard to express in words…
🙂

please share your thoughts on our Forums at –
http://www.nutopia.cc/forum/share-your-ideas-here-to-improve-this-site
or
http://www.nutopia.cc/forum/plans-for-our-future