Hi

I prepare simply draw. And I have question

-if the insulator (blue element) can be in several elements?

– the insulator (blue) should insolate the screw and hemisphere but water can flow between both elements

Attachments:

We calculate that first diameter should be 74 mm. But material has 2 mm thickness. I will have 74 mm inside and about 78 mm ouside or 74 ouside and about 70 inside. OK,

I would like to take 74 mm inside and ouside I will be – after preparation hemisphere – 78 mm (2mm thickness material on the both side).

I would like to put a drawing – how I could do it

Hi

Last time me calculate what the first dianameter shoud be 74 mm. It shoud be inner Or liter dianameter. I think that tnie is not so importat but if żonę Boży make inner that the next olek shoud be make as a inner

So

At that moment we will think in this way, that it should be reach 3 – rd stage.

I know one person in my country who built the cell. But he could’t reach working engine on cell and he could’t reach 3 – rd staege. He think that the reason were weldes on the tubes.

So you suggested that I should make heat treatment. OK

I read that the secund stage of cell orgon is collecting but not stop in cell and it is difficulty to direct to engine. The third staege allow for collect orgon, keep – for e moment in cell and direct to cilinders in engine.

Do you agree with this?

So
You calculate ratio between 1 – st and 3 – rd sphere.

What about charging water. A dont want built special cylinders for preparing water. I would like prepare water in this (above) cell (sphere).

The question is
the water level shoul be above 2-nd shpere (of course after assemble)?

So
Then I start from 35 mm

r1 = 17,5 mm v1 = 22, 4493 cm3
r2 = 22 mm V2 = 44,6022 cm3
r3 = 28 mm v3 = 91,95232 cm 3

Ratio1 (v1/v2) = 0,5033227
Rario2 (v3/v2) = 0,48505

so
c7 2093 next 1053 (near c6 1046) and 507 (near 523)

What do you thing Moshe it should be good?

Hi

I calculate dianameter and dimations will be

25 mm
40 mm
163 mm

Ratio 0,244

I think that ZPE source energy is created on quite different rules but not only. I dont know what will work or not.

The most important thing is – ZPE Maschines are working and only after that we can say that something has inluanse or not.

But generally I think that you have right.

At that moment I still have to find company who… Read more

quote :i guess you could say so, although i don’t think that is actually what the resonating spheres will do.
it is creating a harmony to open up the zero point field so that more “ether” or i guess you can also say “orgone” can flow through. i see the resonance as being important for balance.

What is another elements of balance except… Read more

I ask about this – if cell is tremoring (like string in gitar) it helps in collecting orgone?

–
i have checked it later when I began to get really into creating a resonating moe-joe cell.
in order to get custom sizes costs $10,000 ++ for the molds / dies. i will do this in the future. –

So it is mean that when you try to get… Read more

So

It means that if I want to collect orgon efficiency it should be effect tremor. Of course the highest tremor is on the sphere with the smallest diameter, so the next sphere has smaller frequency tremor and the best effect is when different frequency between one and next diameter is about whole octave or multiple octave.

We take C7… Read more

Thanks Moshe

So. If I understood good.
Our aim is have the same rezonans beetwen 1 – st and 2 – nd and 2 – nd and 3 – rd and 3 and 4
So we should have first and second diameters – the best is to have 2x bigger second diameter) and after that we calculate 3rd and 4th dianameter
Why you think that relation 2X is the best
Why we should… Read more

Hi

Thanks Moshle.

Please put here link there is information how to calculete the best dianameter.

Previously i read that it should by as a Fibonacci sequence (alex S. materials) but I know that it could only theory.

So please put the link with information how to calculate the best dianameters for cell

And please give me… Read more

I do cell with diameters 30 mm 60 mm 90 mm 120 mm. it will be better or worse than made with diameters 25 mm 50 mm 75 mm100 mm I hve problem with my supplier, he dont have so small tools…

Hi

I try do this with 0,6 mm thin steel, but my supplier can’t do this with so thin plate. I try to find supplier which have stamps with right dimentions.

My next question.
When I made hemisphere 30 60 90 120 mm except of 25 50 75 100 mm (1, 2 3, 4 cal). It has influent on joe cell work?

Hi

In my country (in Poland) the cost is about 300 dollars. Not everone can do this, with 316l material – 2mm thickness. Of course made two hamisphere.

So it is not cheap.

Hello

What about ignition system. For example did you change: spark advance angle

Hello

What kind of thechnologi could be made spherical shope of cell.

I will do it by spinning and palet will have 2 mm. If some body knows better, cheaper way to create this?

p.

Hello

What is the “Goop” – it is material or part of something

Regards
P.

Hello everybody

If anybody know how to seal Cell in ball shope , by Teflon or special glue. I thing that will create “negative” cell

I try to do it by spinning from flat plant but it is not cheap
What is the best way to create Cell in ball shope?

p.