[Chris McGuire]

I\’ll be making those changes asap. Thanks!

BTW, That wasn\’t my house in the video, just the home of a brother. It is a good place to work on the moe-joe cell because it is away from many negative influences.

[Chris McGuire]

Finally got a glass vase that will fit my joe cell but it is too large to submerse my second stage water so I\’ll be restarting the charging process again.

---

Attachments:

[Chris McGuire]

hi Moshe:

I have used my water charging kit (with no shoe goo on it anywhere) to charge another pot of water. After charging on and off for various periods of time of over the course of yesterday and night. I allowed the water to rest when I rested last night. When I got up I charged again on and off for a couple hours then I filtered my pot of water through blue shop towels and then started charging again with the clear clean water. I could tell immediately when I connected my 12v DC again with the newly filtered partially charged water that it was creating a stronger field. I have placed various young living oils, a jar of extra virgin coconut oil and some mono atomic gold products right in and around my water charging pot in order resonate them in the field. I am excited to see the results of charging my mono atomic gold supplements.

The bubbles being formed during charging periods are pure white and clean. I can definitely feel the flux being created inside my home each time I re connect my DC.

I took video of my charging setup yesterday including my vortex trap. I set up a safe and mobile method of connecting my moe-joe cells to my truck for charging water wherever I may be. I will take some more pics of my after-1-filtration- setup.

The glass vases in my steel pot are there to raise the water level. After my filtration process I had much less water 🙂

As far as my car kit is concerned, it is shoe-goo\’d up. I\’ll have a pic of that up shortly as well. I sealed it completely and am just waiting until I am sure that my pot of charged water is to the threshold sufficient to transfer it, not really sure how to tell when that is, other than the visibly white blue cloudiness. The bismuth core is fixed (I took pics of it right after I goo\’d it and I\’m not sure about core\’s strength now against the outward force exerted by the all threads when tightening the bolts and threaded spacers onto them).

---

Attachments:

[Chris McGuire]

Moshe:

I did manage to drip some solder into the joints, it was cracked all the way through. I peeled off the goo you had and the copper wire stayed intact and held the two separated pieces together. Little did I know that my 30 watt soldering iron was hot enough to liquefy the bismuth too! It was a little tough trying to get the solder to stay inside the crack because when my soldering iron touched the bismuth it would get hot enough to melt the solder right back out. LOL. Anyway I got everything back together. I\’ll send a pic of what I have now.

The original crack ran right through the middle where the all thread\’s meet, I am running to home depot now and wherever else I have to go to get a couple of good glass containers for charging/filtering. Is Shoe goo (brand) a safe bet to reseal my bismuth core?

---

Attachments:

[Chris McGuire]

I assembled my car kit a couple days ago but I was sloppy in keeping dirt out so I carried it around for a few days assembled yet dirty. I noticed today as I was dis-assembling the car kit unit that the bismuth core was cracked (1 of two that I have). I am wondering what your opinion is of soldering the bismuth core back together? Should I try to liquify the bismuth again? Or can I just use a soldering iron from radio shack and some flux core solder? What effects have you noticed flox core solder joints having on the flow of orgone?

Thanks!

[Chris McGuire]

I have successfully charged my first steel pot of orgone water. I used a base of structured water produced from my own vortex trap. I think this helped my charging process proceed so quickly and on such a low voltage (12 v). I have not yet assembled my car kit so I took the wonderfully milky-white-after-filtered water (produced under a full moon) and gave it to some love starved plants. haha. Can\’t wait to see the reaction of those plants. So my next step is to polish/clean/mount my car kit and charge another batch of water. By the way, these moe-joe\’s are actually quite resilient in the charging process, thanks Moshe for advising against the coatings.

I think my first arrangement of the car kit I will try to charge my engine block from the side without touching any of my fuel system. I want it to slowly and happily charge the engine block while I\’m running on gasoline still and I am a bit excited to see the effects on my gas mileage. 🙂

[Chris McGuire]

Thanks for all the help! I\’ll keep in touch

[Chris McGuire]

My plan today is to begin charging about 4 gallons of water, is a plastic bucket sufficient? Should I charge using only a steel or glass container?

Also, since lower voltages can be used to charge water, will I need anything more than the negative pole of a car battery to charge my water? What about the use of a Car battery charger which is running from a 120vac?

I decided not to go with the full wave bridge rectifier/capacitor off a 120 v ac receptacle just for safety and ease :). Still curious, however, if I still need to go get a capacitor for charging?

Also wondering if I\’ll EVER need any other polarity of a voltage source other than negative?